D2 Check

🔹For polishing check (Post-Polishing Check)

1. To dilute: Mix 1:3 to 1:5 (250 ml to 150 ml product + water to 1 liter).
2. Apply: Spray on a microfiber cloth.
3. Wipe: Rub the paint dry and check for defects.

🔹For coating preparation & wax removal

1. Use undilutedfor removing oil, grease and wax.
2. 2-3 sprays on a microfiber clothto apply.
3. Rub dryuntil the surface is completely clean.

🔹For correction of coating errors

1. Within 20 minutes after applicationuse of the coating.
2. Apply undiluted to a microfibre cloth.
3. Gently wipe over the faulty areasto remove streaks or "clouding".

🔹For removing clearcoat overspray (within 7-15 days after spraying)

1. BringD2 Check undilutedon a microfiber cloth.
2. Wipe over the surface to dissolve any atomized paint particles.
3. Rub dry and repeat if necessary.

🚨Important tips:
❌ Avoid spraying directly on sensitive surfaces.
❌ Do not use in direct sunlight or on hot surfaces.

🔹pH value:9.00
🔹Consumption:150 ml per vehicle
🔹Wax & grease removal:✅ Yes
🔹Coating correction possible:✅ Yes
🔹Dilutability:1:3 to 1:5 for polish control

✅Checks polishing work & defect correction
Shows the actual condition of the paint after polishing by removing fillers and residues.

✅Slow evaporation for better performance
Evaporates slower than IPA (isopropyl alcohol), making it more effective.

✅Optimal adhesion of coatings & sealants
Removes wax layers and greases that can reduce the adhesion of protective coatings.

✅Corrects coating application errors
Removes any streaks or clouding within 20 minutes of application without affecting protection.

✅Removes clearcoat overspray
Dissolve clearcoat particles after spraying, without the need for polishing.

⚠️DANGER
🔥 Highly flammable – keep away from heat & open flames.
😵May cause dizziness or drowsiness.
👀 May cause serious eye irritation.
🧤 Wear protective gloves and glasses when applying.

💡Key Ingredients:
✔Isopropanol & 1-methoxy-2-propanol(for effective degreasing).
✔Non-ionic surfactantsfor optimal cleaning.